manualshive.com logo in svg

Schiller CARDIOVIT AT-1 G2, User Manual, Page: 19 / 60

Share
Download
Schiller CARDIOVIT AT-1 G2 User Manual Download Page 19

 Page 19

A

rt.

 no.

: 2.

511

235 Rev.:

 d

Operation

3

User guide

Changing the Printing Paper

3.5

 CARDIOVIT AT-1 G2

3.5 Changing the Printing Paper

Important

The device is delivered without printing paper inserted. The thermal paper is sensitive
to heat, humidity and chemical vapours. The following points apply to both storage,
and when archiving the results:

• Before use, keep the paper in its original cardboard cover. Do not remove the card-

board cover until the paper is to be used. 

• Store the paper in a cool, dark and dry location.
• Do not store near chemicals, e.g. sterilisation liquids.
• Do not store in a plastic cover.
• Certain glues can react with the paper. Therefore, do not use glue to attach the

printout onto a mounting sheet.

SCHILLER can only guarantee perfect printouts when original SCHILLER chart paper
or chart paper of the same quality is used.

1. Open the paper tray.

2. Remove the remaining paper.

3. Place a new paper pack into the paper tray with the printed (grid) side facing 

upwards and the black paper mark facing the top of the unit.

4. Pull out the first page as shown on the left.
5. Close the paper tray.

Summary of Contents for CARDIOVIT AT-1 G2





























































Reviews:

No comments