manualshive.com logo in svg

Schiller CARDIOVIT AT-1 G2, User Manual, Page: 2 / 60

Share
Download
Schiller CARDIOVIT AT-1 G2 User Manual Download Page 2

Address Headquarters

SCHILLER AG

Phone: +41 (0) 41 766 42 42

Altgasse 68

Fax: +41 (0) 41 761 08 80

CH-6341 Baar, Switzerland

E-mail: 

[email protected]

Web:

www.schiller.ch

Sales and Service Information

The SCHILLER sales and service centre network is world-wide. Contact your nearest 
SCHILLER subsidiary to obtain the address of your local distributor. In case of difficulty, 
a complete list of all distributors and subsidiaries is provided on our internet site: 

www.schiller.ch

Sales information can also be obtained from: 

[email protected]

The CARDIOVIT AT-1 G2 bears the CE-0123 mark (Notified Body TÜV-SÜD Produkte Service
GmbH, Ridlerstr. 65, 80339 Munich, Germany), indicating its compliance with the essential require-
ments of the Annex I of the Medical Device Directive 93/42/EE regarding safety, functionality and
labelling. The requirements apply to patients, users and third persons who come into contact with
this device within the scope of its intended use.

Article no.: 2.511235 Rev.: d
Issue date: 28.03.18
Based on DE vers. b
SW > 1.1.0

Summary of Contents for CARDIOVIT AT-1 G2





























































Reviews:

No comments