13
XRZ
At operator's right side
KEYSWITCH (K)
-
The keyswitch has three
positions:
OFF
,
RUN
, and
START
. Insert the key
and turn it clockwise to move the switch from
OFF
to
RUN
. Turn it further to
START
and hold to engage
the starter. Release the key and the switch will return
to
RUN
from
START
. Turn the key counterclockwise
to
OFF
to stop the engine.
THROTTLE (T)
-
Move the throttle lever forward to
increase engine speed until the maximum governed
engine
RPM
is reached. Move the lever rearward to
decrease engine speed until the engine reaches its
idle speed.
CHOKE (C)
Pull the choke control out to set the choke
ON
. Push
it in to set the choke
OFF
.
POWER TAKE OFF (PTO) SWITCH
(P)
-
The operator must be in the seat when engaging the
PTO
or the engine will kill. Pulling the
PTO
switch
out engages (turns on) the
PTO
and starts the blades
or other attachment. Pushing the
PTO
switch in
disengages (turns off) the
PTO
and stops the blades
or other attachment.
NOTE:
The
PTO
switch does not control
attachments powered by a separate engine.
-
Disengage the
PTO
whenever you stop or leave
the operator’s position
-
Shut off engine with the key and remove the
spark plug wires before making adjustments or
unplugging a clogged mower.
-
Do not engage the
PTO
until ready to start
mowing.
HOUR METER (M)
- Records accumulated time
the machine is in operation and provides service
alerts. Push the release MODE button to toggle
between functions. Provided service alerts include
change engine oil and filter, change hydraulic oil,
and service air filter. When the service time is
approaching, an alert message will flash temporarily,
interrupting whatever mode the meter is in. This
will continue until the alert is reset. When the
service interval reaches "0" hours, the word "NOW"
replaces the hours remaining. To reset the service
alert, depress and hold down the mode button for 6
seconds while in the alert to be cleared.
CONTROLS
