Schiller ARGUS LCM, Operating Instruction, Page: 21 / 56

Page 19
Operation 3
Operating Instruction Initial settings 3.4
A
rt.
no.
: 2.
510
474 rev.
: d
ARGUS LCM/PLUS
3.4.4 Alarm limit setting
The following table gives the default alarm limits settings for adults. A changed val-
ue can be stored as default in the menu
About+/Software .
The factory defaults are listed in the sections 7.1 and 7.2. .
All alarm limits are reset to the default or user specific system settings after switch-
ing the unit off/on, if they have not been stored as default. (see menu
About+/Soft-
ware )
1. Press alarm limit button.
2. Press up/down or left/right buttons to select an alarm parameter and confirm
with enter . The entry field appears blue.
3. Press up/down to change the value and confirm with the enter button.
4. Press the up/down or left/right buttons to select other parameters or press the
alarm limit button to exit the menu.
Alarm Low High Unit
a
Prio.
a. "High" priority = audible signal with 2 x 5 impulses.
"Low" priority = audible signal with 1 x 2 impulses and 20 s pauses between the
impulse sequences.
b
Print
b. Print "On" = Default printout containing a warning message when the min./max.
value is exceeded.
HR 50 140 /min High Off
ASYS - 2 s High Off
c
RRi
c. If the RRi alarm option is Off in the ECG settings panel, the "Low" and "High" val-
ues for RRi and APNi will be "Off".
8 35 min Low Off
c
APNi
- 25 s High Off
SpO
2
90 101 % Low Off
PP 50 140 min High Off
SYS 100 140 mmHg Low Off
DIA 40 95 mmHg Low Off
MAD 70 140 mmHg Low Off
Ps 95 180 mmHg Low Off
Pm 50 100 mmHg Low Off
Pd 40 100 mmHg Low Off
eCO
2
35 45 mmHg Low Off
CO
2
i
0 2 mmHg Low Off
RRc 8 35 /min Low Off
APNc - 25 s High Off