4
Training
4.2
Training procedure fully automated AED
Page 16
A
rt.
no.
: 0-4
8
-02
93 Rev. b
FRED PA-1
®
TRAINER
4.2 Training procedure fully automated AED
• The following instructions comply with the scenario “shock recommended and then
shock not recommended
Trainee starts by opening cover and
follows instructions
1. stay calm and follow instructions
2. call emergency service dial number written on the device
3. use only if patient is unresponsive
4. check that electrodes connector is correctly fitted in machine
5. remove clothes from upper body - cut if necessary
6. tear open electrode package located in device cover
7. as shown on package peel off the packing and apply both electrodes to the upper
body.
Trainer has to confirm correct per-
formance with the button on the de-
vice or via Defi training application
Trainer confirms that the above procedure was correctly performed by the train-
ee. Otherwise, the instructions are repeated from step 1. After the second repe-
tition, the instructions jump to step 15.
8. stand clear of patient heart rhythm analysis will be performed
9. analysing heart rhythm
10. shock advised
11. warning stand clear of patient shock will be delivered
12. 3-2-1
13. shock delivered
14. advise to do chest compression: according to configuration
15. repeat until next instruction (the next instruction starts with step 8.
– After the instruction “no shock advised” (step 10), it jumps to step 14.
Finishing resuscitation process
To finish the resuscitation process and switch the device to standby mode, the
pads connection confirmation button must be pressed to simulate the disconnec-
tion of the patient and the cover closed. After 30 seconds the device will be in
standby mode.
• If the patient is not disconnected the resuscitation process will continue even if the
cover is closed (like the real FRED PA-1).
• The device will remind the user with regular acoustic signals that it is in standby
mode. To switch the device off completely the ON/OFF switch must be used.
