8
Installation Instructions
STANDARD SECTIONS (PIPES,TEES AND ELBOWS)
All flue gas bearing components must be installed with the male spigot pointing towards the
appliance.
With the exception of the direct connection to the appliance, there is no requirement to apply
sealant to the joints of the Prima Smooth system.
CONNECTING TO AN APPLIANCE
Connection to the appliance can be done using either an appliance connector or a standard pipe
or inspection pipe. In both cases the male spigot should be pushed inside the appliance outlet.
The joint between the connecting flue pipe and the appliance should be securely caulked and
sealed using non asbestos fibre rope (or alternative) and fire cement.
JOINT DETAIL
Female Socket
Male Spigot
Direction
of flue gases
Direction
of flue gases
Female Socket
Male Spigot
Appliance Connector
Appliance Spigot
Appliance Connector
Standard Pipe Spigot
