5.0. REAR PANEL
PAGE9
4.8. MAST REV
(Spring reverb)
This control regulates the general level of the spring reverb, common to all channels. the amount of the effect can be
regulated individually for the single channel trough the dedicated controls.
“THE ULTIMATE REVERB” is designed and engineerd to provide unequalled performance. It employs innovative new circuit
technology. the reverb tank is shielded to reduce noise from stray magnetic fields. The spring reverb uses only the finest
components to obtain the highest quality reproduction. The spring is driven by a pure class-A (constant current) circuit
and captured by a balanced microphone preamp.
4.9. MAST VOL
(master volume)
Controls overall system volume.
5.1. POWER ON/OFF
System ON/OFF switch.
5.2. MAIN PWER CONNECTION
Connection to mains (230vAC/115vAC - 50Hz/60Hz)
PLEASE ENSURE THE PROPER VOLTAGE AND USE THE ORIGINAL CONNECTION CABLE!
5.3. FUSE CARRIER
Place for fuse (USA-JAPAN...) 115V - 3.15A; (EU...) 230V - 1.6A
5.4. GROUND LIFT
This switch connects and disconnects the ground between source and amplifier. Use this switch to suppress hum cau-
sed by the power mains.
5.5. POWER SWITCH
This switch changes the main power voltage from 230vAC to 115vAC
Summary of Contents for Unico
Page 1: ...UNICO ...
