1.0. MIC
PAGE5
1.1. MIC IN
(microphone input)
This input is electronically balanced for XLR - type connections. It has been optimized for connecting microphones or other
transducers having low impedance and low level. The nominal value of impedance is 4.7. Kohm. The input is perfect for
dynamic or condenser vocal microphones.
1.2. GAIN
(Trim)
This variable gain preamplifier adjusts the sensitivity level to ensure the best possible processing of the signal through
the channel. It is important that this input level be set and optimised in the best way to achieve the cleanest sound pos-
sible.
1.3. 48V
Phantom power supplies the XLR connector with 48 Volts for powering condenser microphones.
1.4. HIGH - HIGH MID - LOW MID - LOW
These controls are devoted to high, high mid, low mid and low frequency regulation. Offering cut and boost of +/- 15dB,
they allow a wide range of tonal variations to be explored. When the controls are positioned at 12:00 there is no cut or
boost of the selected frequency band.
1.5. REV
This rotary control sets the level of the spring reverb on the individual channel.
1.6. VOL
(Volume)
This rotary control regulates the channel volume.
Summary of Contents for Unico
Page 1: ...UNICO ...
