2.1. DYN IN
(Combo connector XLR or 1/4” Jack)
This input is electronically balanced for XLR - type connections and unbalanced for 1/4” Jack type connections. It has been opti-
mized for connecting microphones or other transducers having low impedance and low level. The nominal value of impedance
is 10Kohm. The 10V phantom power switch supplies the Jack input and may be used for the electrostatic condenser micropho-
nes with low sensitivity. This input is also designned for electrodynamic microphones such as Schertler DYN-series transducers.
2.2. GAIN
(Trim)
This variable gain preamplifier adjusts the sensitivity level to ensure the best possible processing of the signal through
the channel. It is important that this input level be set and optimised in the best way to achieve the cleanest sound pos-
sible.
2.3. 10V
Phantom power supplies the jack connector with 10 Volts for powering electret microphones.
2.4. HIGH - MID - LOW
These controls are devoted to high, mid and low frequency regulation. Offering cut and boost of +/- 15dB, they allow a
wide range of tonal variations to be explored. When the controls are positioned dentrally there is no cut or boost of the
selected frequency band.
2.5. RESON
(Resonance)
The Resonance (notch) filter attenuates (cuts) the frequency of 180Hz, to reduce low-frequency feedback.
- Left: no attenuation (flat)
- Right: maximum attenuation
2.6. REV
This rotary control sets the level of the spring reverb on the individual channel.
2.7. VOL
(Volume)
This rotary control regulates the channel volume.
2.0. DYN
PAGE6
Summary of Contents for Unico
Page 1: ...UNICO ...