background image

IMPORTANT SAFETY INSTRUCTIONS

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS 

INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE” 

WITHIN THE PRODUCT ENCLOSURE THAT MAY BE OF A SUFFICIENT MAGNITUDE TO CONSI-

THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE 

USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN 

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s 

instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other 

apparatus (including ampliers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized 

plug has two blades with one wider than the other. A grounding type plug has two blades 

and  a  third  grounding  prong. The  wide  blade  or  the  third  prong  are  provided  for  your 

safety. If the provided plug does not fit into your outlet, consult an electrician for replace-

ment of the obsolete outlet.

10)  Protect  the  power  cord  from  being  walked  on  or  pinched  particularly  at  plugs, 

convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or 

sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus 

combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of 

time.

WARNING

TO REDUCE THE RISK OF FIRE OR 

ELECTRICAL SHOCK DO NOT EXPOSE THE 

Summary of Contents for LaFaro DELUXE










Reviews: