WARNINGS
Keep this manual for possible future needs
Pay attention not to pour liquids onto the device and do not operate in conditions of excessive
humidity
Do not install the device close to sources of excessive heat, do not expose it to direct solar radiation
and do not position it without protection in a dusty environment
Be sure that the mains voltage does not exceed the value indicated on the back panel
Do not use the device if the mains cable or the plug aren’t in a perfect condition (if necessary, replace
it)
If the mains cable has to be replaced, the operation must be carried out by qualified personnel.
Replace the cable exclusively with one that is an exact substitute
In order to avoid interference, do not install the device close to power transformers, TV sets, RF
transmitters, electric motors or any source of electric energy
Do not point microphones against speakers: this could generate annoying whistles (Larsen effect) that
cause damage
In order to avoid unpleasant and costly inconveniences, use only original connecting cables
To completely disconnect this apparatus from the AC mains, disconnect the power supply cord plug
from the AC socket
When cleaning, do not use solvents (e.g. acetone or alcohol). These could damage the external
finishing and the serigraphy
Do not attempt to service this product. In case of malfunction of any part of the system call the
nearest technical assistance centre or a specialized technical centre
For good ventilation, the dissipation vents should never be covered or obstructed by blankets, sofas or
similar furniture. Be sure also to leave sufficient clearance between the dissipation vents and any other
surface
No source of flames, e.g. candles, should be placed on or near the device
WARNING
PRECAUTIONS
Read carefully this manual and
follow these precautions before
