1. Introduction
Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
we hope your new tool brings you much enjoyment
and success.
Note:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by
the product that occurs due to:
•
Improper handling,
•
Non-compliance of the operating instructions,
•
Repairs by third parties, not by authorized service
technicians,
•
Installation and replacement of non-original spare
parts,
•
Application other than specified,
•
A breakdown of the electrical system that occurs
due to the non-compliance of the electric regu-
lations and VDE regulations 0100, DIN 57113 /
VDE0113.
We recommend:
Read through the complete text in the operating in-
structions before installing and commissioning the
device.
The operating instructions are intended to help the
user to become familiar with the machine and take
advantage of its application possibilities in accord-
ance with the recommendations.
The operating instructions contain important informa-
tion on how to operate the machine safely, profes-
sionally and economically, how to avoid danger, cost-
ly repairs, reduce downtimes and how to increase
reliability and service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula-
tions that apply for the operation of the machine in
your country.
Keep the operating instructions package with the
machine at all times and store it in a plastic cover to
protect it from dirt and moisture. Read the instruction
manual each time before operating the machine and
carefully follow its information.
The machine can only be operated by persons who
were instructed concerning the operation of the ma-
chine and who are informed about the associated
dangers. The minimum age requirement must be
complied with.
In addition to the safety instructions contained in this
operating manual and the specific regulations of your
country, the technical rules generally accepted for the
operation of machines of the same type must be ob-
served.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.
2.
Device description (fig. 1-16)
1.
Blow-off device
2.
Mounting (Blow-off device)
3.
Knurled screw
4.
Holder (Saw blade guard)
5.
Saw blade guard
6. Saw table
7.
Foot pedal
8.
Cover, left
9. Storage box
10. Bearings
11.
Tightening lever
12. Arm
13. Graduated scale
14.
Locking lever
15. Suction connection
16. ON/OFF switch
17.
Operating mode selection switch
18.
Speed regulator
19.
Assembly points
20.
Work lamp
21.
ON / OFF switch work lamp
22.
Saw blade
23.
Allen key, 3 mm
24.
Retaining device
25.
Screw (retaining device)
26.
Table insert
27.
Saw blade holder, top
28.
Upper saw blade clamping screw
29.
Lower saw blade clamping screw
30.
Saw blade holder, bottom
31.
Angle (not included in the scope of delivery)
32.
Screw (degree scale)
33. Pointer
34.
Screw (left cover)
35.
Screw (left cover)
36. Fine-wire fuse
37.
Adjustment screw with locknut
3. Scope of delivery
•
Scroll saw
•
Saw blade guard (5) with depressor (24)
•
Blow-off device (1)
•
Saw blade (22) for wood and plastics (4x)
•
1 bolt bag: 5 hexagonal bolts M8 x 50,
4 hexagonal nuts M8, 8 washers
•
Allen key, 3 mm (23)
•
Operating manual
www.scheppach.com
GB | 21
Summary of Contents for DECO-XLS
Page 142: ...www scheppach com 142 ...
Page 143: ...www scheppach com 143 ...