Scheppach 5905209901, Translation Of Original Instruction Manual

Page: 24 / 144

www.scheppach.com
24 | GB
*S3, periodic intermittent operation without influence
of the starting process on the motor heating. Identi -
cal duty cycles with a period at load followed by a pe-
riod at no load. Running time 10 minutes; duty cycle
is 25% of the running time.
Noise and vibration
Sound pressure level L
pA
89.8 dB(A)
Uncertainty K
pA
3 dB
Sound power level L
WA
96 dB(A)
Uncertainty K
WA
3 dB
m
WARNING: Noise can have serious effects on
your health. If the machine noise exceeds 85 dB (A),
please wear suitable hearing protection.
Pressure:
The performance level of the built-in hydraulic pump
can reach a short-term pressure level for a splitting
force of up to 4 tons. In the basic setting, hydraulic
splitters are set at the factory to an approx. 10% low-
er output level. For safety reasons, the basic settings
must not be changed by the user. Please note that
external circumstances such as operating and ambi-
ent temperature, air pressure and moisture affect the
viscosity of the hydraulic oil. In addition, manufactur-
ing tolerances and maintenance errors can affect the
reachable pressure level.
8. Unpacking
• Open the packaging and remove the device care -
fully.
• Remove the packaging material as well as the
packaging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for trans-
port damage.
• In case of complaints the dealer must be informed
immediately. Subsequent complaints will not be ac-
cepted.
• If possible, store the packaging until the warranty
period has expired.
• Read the operating manual to make yourself famil-
iar with the device prior to using it.
• Only use original parts for accessories as well as
for wearing and spare parts. Spare parts are avail -
able from your specialized dealer.
• Specify our part numbers as well as the type and
year of construction of the device in your orders.
m
ATTENTION
The device and packaging materials are not toys!
Children must not be allowed to play with plas -
tic bags, film and small parts! There is a risk of
swallowing and suffocation!
Remaining hazards
The machine has been built using modern tech -
nology in accordance with recognized safety
rules. Some remaining hazards, however, may
still exist.
• The splitting tool can cause injuries to fingers and
hands if the wood is incorrectly guided or support-
ed.
• Thrown pieces can lead to injury if the work piece
is not correctly placed or held.
• Injury through electric current if incorrect electric
connection leads are used.
• Even when all safety measures are taken, some
remaining hazards which are not yet evident may
still be present.
• Remaining hazards can be minimized by following
the safety instructions as well as the instructions in
the chapter Authorized use and in the entire oper -
ating manual.
• Health hazard due to electrical power, with the use
of improper electrical connection cables.
• Release the handle button and switch off the ma-
chine prior to any operations.
• Avoid accidental starts of the machine: Do not
press the start button while inserting the plug into
the socket.
• Use the tools recommended in this manual to ob-
tain the best results from your machine.
• Always keep hands away from the work area when
the machine is running.
7. Technical data
Dimensions L x W x H 995 x 425 x 610 mm
Wood ø min. - max . 50 - 250 mm
Wood length min. - max 130 - 370 mm
Weight 45 kg
Motor 230/50 V/Hz
Input P1 1500 W
Output P2 1100 W
Rating S3 25%
Splitting Power max. 4 t
Cylinder rise 290 mm
Cylinder speed (fast fwd.) 3.86 cm/sec
Cylinder speed (return) 6.44 cm/sec
Hydraulic fluid capacity 2,4 l
Operating pressure 165 bar
Motor speed 2850 1/min
Subject to technical changes!