www.scheppach.com /
+(49)-08223-4002-99 /
+(49)-08223-4002-58
GB | 79
14. Troubleshooting
Fault
Possible cause
Remedy
Motor does not
work
Motor, cable or plug
defective, fuses burnt
Arrange for inspection
of the machine by a
specialist.
Never repair the motor
yourself. Danger!
Check fuses and re-
place as necessary
The motor starts
up slowly and
does not reach
operating speed.
Voltage too low, coils
damaged, capacitor
burnt
Contact an electrician to
check the voltage.
Arrange for inspection of
the motor by a special-
ist. Arrange for replace-
ment of the capacitor by
a specialist
Motor makes
excessive noise
Coils damaged, motor
defective
Arrange for inspection
of the motor by a spe-
cialist
The motor does
not reach its full
power.
Circuits in the net-
work are overloaded
(lamps, other motors,
etc.)
Do not use any other
equipment or motors on
the same circuit
Motor overheats
easily.
Overloading of the
motor, insufficient
cooling of the motor
Avoid overloading the
motor while cutting,
remove dust from the
motor in order to ensure
optimal cooling of the
motor
