Disassembly
2 - 10 Removing the System Memory (RAM)
2.Disassembly
Removing the System Memory (RAM)
Figure 6
RAM-1 Module
Removal
a. The RAM modules will
be visible at point
.
b. Remove the screws
and lift the shielding
plate out.
Contact Warning
Be careful not to touch
the metal pins on the
module’s connecting
edge. Even the cleanest
hands have oils which
can attract particles, and
degrade the module’s
performance.
1
The computer has two memory sockets for 204 pin Small Outline Dual In-line Memory Modules (SO-DIMM) supporting
DDR3L Up to 1600 MHz. The main memory can be expanded up to 16GB. The SO-DIMM modules supported are
1024MB and 2048MB
DDR3L
Modules. The total memory size is automatically detected by the POST routine once you
turn on your computer.
Memory-1 Upgrade Process
1.
Turn
off
the computer, turn it over, remove the keyboard (
page 2 - 5
).
2.
The RAM modules will be visible at point
after removing the shielding plate (
Figure 6a
)
.
3.
Remove screws
-
and lift the shielding plate
off the computer
(
Figure 6b
)
.
1
2
5
6
a.
1
6
2
3
5
4
b.
6. RAM Shielding Plate
•
4 Screws
Summary of Contents for XMG P505
Page 1: ......
