Installation instructions for solar charge regulator LRM 1218
4
Date: 22.07.2015
822.0213 MA / EN
1
2
3
1
2
3
2
3
1
4
Fig. 2
Connector cables delivered with the LRM 1218 solar charge regulator
Pos.
Qty
Name
1
1
EBL ... connector cable (signals for display charge cur-
rents on DT ... / LT ...)
2
1
EBL ... connector cable (batteries for charge currents)
3
1
EBL ... adapter cable (charge current for starter battery)
for EBLs without direct starter battery solar charge cur-
rent input
4
1
SDT
BUS connector cable
Y
Not all parts/cables are required for every different application.
4 Mechanical installation
Y
This device is intended for installation into a vehicle.
"
For applications in which the cables provided are used to connect to an
EBL ... electroblock from Schaudt (as in Sections 5.2 and 5.3), the solar
charge regulator
must
be installed in the direct vicinity of the electroblock
(max. distance to front plate 30 cm).
"
For other applications, a dry and sufficiently ventilated place in the insula-
ted interior is to be selected for installation. No condensation is allowed to
form on the device. To prevent a build-up of heat, ventilation holes facing
the living area must be provided in the upper and lower areas of the
place of installation. Its cross-section is based on the size and average
temperature of the place of installation.
Environment
