Installation instructions for solar charge regulator LRM 1218
15
Date: 22.07.2015
822.0213 MA / EN
7 Initial use
7.1 Checks prior to initial use
"
Ensure that all the connections are correct (only for initial use).
"
Ensure that the batteries or the electroblock are connected (depending
on operating mode).
"
Connect the solar module to the solar charge regulator with the correct
polarity. The solar charge regulator is ready to use.
8 Technical details
8.1 Mechanical details
135 x 48 x 90 (W x H x D in mm)
360 g
Blue plastic (RAL 5010)
8.2 Electrical details
12 V
MPP regulator (Maximum Point Tracking)
Dependent on setting, see operating instructions table
See operating instructions
For shaded solar module:
Approx. 4 mA from leisure area battery
Approx. 0.5 mA from starter battery
6-cell lead acid or lead gel batteries, rated 55 Ah or higher
F
At least 36--cell modules
F
Open circuit voltage 20 ... 32 V
F
Maximum overall capacity of solar modules 275 Wp
8.3 Environmental parameters
-10
C to +50
C
-20
C to +70
C
Operation in dry environment only
CE marked
9 Storage, packaging and transportation
Only transport and store the solar charge regulator if the packing is suitable
and ambient conditions are dry.
Before starting up
Starting up the system
Dimensions
Weight
Casing
Nominal voltage
Regulating principle
Final charge voltage
Charge current
Solar charge regulator
consumption
Suitable batteries
Suitable solar modules
Operating temperature
Storage temperature
Humidity
CE
