SDT-0018-02EN
Situation: 18.07.2005
5
Instruction Manual Control and Switch Panel DT 201 B
5
Operation
5.1
Switching the 12 V power supply for the living area
on and off
12 V main switch button
The 12 V main switch button switches all consumers and the control and
switch panel on and off.
Exceptions:
P
Floor light/step
P
Frost protection valve
P
Heater
P
Spare 4
P
Compressor refrigerator/AES refrigerator
Switching on
Press the 12 V main switch button. The illuminated basic display appears
and the system is ready for use. The basic display is illuminated for
20 seconds. If there is an alarm message, this is also indicated in the basic
display.
Switching off
Press the 12 V main switch button. The system shuts down. The text "12 V
OFF" appears for 3 seconds.
5.2
Using the basic display
Basic display button
The basic display gives information on mains indicator, step, special equip-
ment and temperature as well as date and time.
Press basic display button.
The 1st page of the basic display appears.
Fig. 3
Basic display
230 V mains indicator
The 230 V mains indicator symbol is displayed, if the input of the Electrobloc
is live and if the control and switch panel has been switched on using the 12 V
main switch.
W
Switch off the 12 V main switch when you leave the vehicle. This prevents
the living area battery from unnecessarily discharging.
SDT00095
W
If no button is pressed for 20 seconds, the system automatically switches
back to the basic display that is not illuminated.
