Wireless Code-Keypad
U
KP-
4
•
The key input is always confirmed by a beep. If you do not hear a beep, your entry was not accepted. In this case
please try again.
•
Ensure that the radio code-keypad is kept away from children and can only be used by people who have been
instructed on how the remote-control door functions!
•
Only use the code-keypad when you are in sight of the door/gate.
Never stand in the door’s area of travel.
•
The code switch must always be taught in close to the door/gate operator. Use only original parts.
•
When teaching in the code-keypad, the door/gate travel can be accidentally triggered.
•
IP 44 - Protect the code-keypad from the elements such as rain, snow, direct sunlight or otherwise the function of
the transmitter may be impaired.
•
It is essential that you
install
the radio code
-keypad
near the door
/gate
operator
.
•
To change the battery, please loosen the screw on the underside of the radio code
-keypad
, remove
the keypad
from
the mounting plate and then loosen the two screws on the back.
Programming for the following manufacturers (
F
ixed
-C
ode):
•
Came:
T431/ T434/ TOP 432A/ TOP 434A/ TOP 432/ TAM32SA/ TOP 432NA
•
Dickert 433 MHz:
MAHS433
•
Hörmann 868 MHz (
blue buttons
):
HSM4/ HS4/ HSE2/ HSP4/ HS1
•
Marantec 433 MHz:
Digital 101/ 12/ 302/ 304/ 323/ 321/ 382/ 384/ 313
•
Marantec 868 MHz:
Digital 101/ 12/ 302/ 304/ 323/ 321/ 382/ 384/ 313
•
Somfy:
Telis/ K-Easy/ K-Easy New/ K-Easy Old/ Mitto Key Go RTS/ Telis RTS/ Keytis RTS/ Keytis RTS NS/ Alarma
•
All other manufacturers with a fixed code from the compatibility list.
1. Press
any
key to activate the code switch.
2. Press and hold
button A
and then press
button B
four times in a row.
The LED on the code switch starts to flash slowly.
3. Now hold an original hand-held transmitter from your door drive
approx. 2-3 cm
away
from the radio code switch and hold down the button to be transmitted
for
approx. 3 seconds
. The LED of the code switch flashes quickly.
4. Now
press button 1, 2, 3 or 4
(depending on which channel you want to use)
on the code switch to save the code.
1. Press
any
key to activate the code switch.
2. Press and hold
button A
and then press
button B
four times in a row.
The LED on the code switch starts to flash slowly.
3. Now hold an original hand-held transmitter from your door drive
approx. 2-3 cm
away from the radio code switch and hold down the button to be transmitted
for
approx. 3 seconds
. The LED of the code switch flashes quickly.
4.
Now
press button 1, 2, 3 or 4
(depending on which channel you want to use)
on the code switch to save the code.
5.
Press the programming button / learn button on your operator and then enter the
6-
digit code
of the taught-in channel
once
on the code-keypad. The code-keypad has
now been taught in. Enter the
6-digit code twice
in a row for
Schellenberg operators
.
IMPORTANT!
If you do not know how a radio transmitter can be taught in to your door/gate
operator, please consult the instruction manual for your door/gate operator!
Programming for the following manufacturers
(Rolling-Code)
:
•
Schellenberg 433 MHz:
SMART Drive 10/ SMART Drive 14
•
Sommer - Aperto 868 MHz:
4020V000/ 4025V000/ 4026V000/ 4031V000/ 4011V000/4035V002
•
Tormatic - Novoferm 433 MHz:
Novotron 502/ Novotron 522/ Vivotron/ MHS43-2/ MAX43-2/ MIX43-2
ATTENTION
!
4
Frequen
cy
:
280-870
M
H
z
Channels
:
4
Batter
y:
2x 1.5
V
/ AAA
Transmission Power
:
9.5 dBm
Working Temperature
:
-10°C - +40°C
IP: 44
Article Number
: ST
121001
Model
N
um
b
er: UKP-4
