Change administrator pass
code
The factory-set
administrator passcode
is
999999
. It allows the user to change the access codes for all four channels of the code
-keypad
. To
change the administrator pass
code
, please proceed as follows:
1.
Press the
B button
on the code-keypad
once
and then type in the
currently valid administrator passcode
(999999
for factory settings).
-> You'll
hear two beeps and the LED on the code-keypad lights up red!
2.
Now
press button 1 once
and then
button B once
.
-> You
'
ll hear two beeps again, the LED flashes once and then
lights up red again.
3.
Now enter your new,
6-digit administrator passcode
and then
press the B button once
.
-> The LED flashes once
and then lights up red again.
4.
Now type in the
6-digit administrator passcode again
and then
press the B button again
->
You'll hear a beep, the
LED flashes once and then
goes out. The new administrator passcode is now saved.
Change the access code
The factory-set access codes are as follows
:
Channel
1:
111111
Channel 2:
222222
Channel 3:
333333
Channel 4:
444444
To change an access code, please proceed as follows:
1.
Press the B key once
and then enter the
administrator passcode
.
-> You'll hear a beep, the LED on the code-keypad
flashes once and then lights
up red.
2.
Now
press button 1 once
(for channel 1) and then
button A once
.
-> You'll hear a beep, the LED on the code-keypad flashes once and then lights
up red.
3.
Now enter your
new 6-digit access code
and then
press button B once
.
-> The LED on the code-keypad flashes
once and then lights up red.
4.
Enter the new
6-digit access code again
and press the
B button once again
.
-> You'll hear a beep, the LED flashes
once and then goes out. The
new access code is now saved.
Simplified EU Declaration of Conformity (CE)
Schartec hereby declares that the code-keypad UKP-4 complies with Directive 2014/53/EU. The full text of the EU Declaration
of Conformity is available at the following Internet address: www.schartec.de/en
Information about battery regulation
As a dealer for the distribution of electronic, battery-operated devices, we are obliged by law to inform our customers about
the following:
Electrical and electronic devices, as well as batteries, must not be disposed of as household or residual waste, but must be
delivered in the appropriate acceptance and collection points.
The complete version of the battery law can be found here:
http://www.gesetze-im-internet.de/bundesrecht/battg/gesamt.pdf
5
SCHARTEC
a trademark of bau-shop-24 GmbH
Fritz-Müller-Strasse 119
73730 Esslingen
Germany
WEEE Reg. Nr.: DE90317979
BattG Reg. Nr.: 21008776
IMPORTANT!
The radio code switch UKP-4 has 4 channels and can therefore operate up to 4 different door drives. To program another channel,
please carry out the same steps.
Therefore 1 stands for channel 1, 2 for channel 2, 3 for channel 3, and 4 for channel 4
ATTENTION!
The door travel can be accidentally triggered when the radio code-keypad is being taught in.
