NRWG Multi-Leaf Damper Models JK-180MB / JK-190
Technical
documentation
Accessories |
Construction subject to change
No return possible
Version: 2016-08-02 | Document: 09/53 | Page 7
ACCESSORIES
JK-180MB
Mounting plate (-MB)
Preassembled
For flush-mounted installation
Galvanised sheet steel 1.5 mm
Fastening materials
-
Allen screw
-
Washer
-
Cage nut
Wall anchor package 1 (-M1)
Fastening material for fastening mounting plate to masonry
Anchor bolt
Sealing tape
Spacer sleeves
O-ring
JK-190
Wall anchor package 2 (-M2)
Fastening material for fastening multi-leaf damper to mason-
ry
Anchor bolt
Sealing tape
Spacer sleeves
O-ring
Wall anchor package 3 (-M3)
Fastening material for fastening accessories to masonry
Anchor bolt
Sealing tape
Spacer sleeves
O-ring
Support sheet (-AB)
Sheet metal bracket serves for offsetting the fastening holes
to avoid chipping on the wall edge
2-part
Galvanised sheet steel 1.5 mm
Not preassembled
Incl. screw package for fastening to the NRWG damper
Mounting bracket edge mounting (-EBW-R-H) / (-EBW-R-B)
Mounting bracket for fastening to ceiling on three sides and
for fastening to wall on one side (definition H or B side)
2-part
Galvanised sheet steel 1.5 mm
Preassembled, but not fastened to the multi-leaf damper
Incl. screw package for fastening to the NRWG damper
Mounting bracket corner mounting (-EBW-E-L)/(-EBW-E-R)
Mounting bracket for fastening to ceiling on two sides and
for fastening to wall on two sides
2-part
Galvanised sheet steel 1.5 mm
Preassembled, but not fastened to the multi-leaf damper
Incl. screw package for fastening to the NRWG damper
NOTE
Screw package 1
for B and H dimensions <1030 mm
-
M6 screws
-
M6 cage nuts
-
M6 U-washers
-
M6 nuts
Screw package 2
for B or H dimensions <1030 mm
-
M6 screws
-
M6 cage nuts
-
M6 U-washers
-
M6 nuts
WEATHER PROTECTION HOOD
Design as plinth with roof hood or louvre hood
Condensate channel with drain pipe in plinth part
Bird protection grille on the entire ventilation surface area
Galvanised sheet steel 1.2 mm
Plinth spot welded
Hood spot welded and riveted
