Fire damper BSK-RPR-EU
Technical
documentation
Specification
texts
Construction subject to change
No return possible
Version: 2015-02-01 | Document: 09/48 | Page 15
SPECIFICATION TEXTS
The fire damper BSK-RPR-EU corresponds to EN 15650, EN
13501-3 and EN 1366-2.
BSK-RPR-EU has been tested according to EN 1366-2 in com-
pliance with Declaration of performance no. 09-48-DoP-BSK-
RPR-EU-2013-07-01. It has the EC certificate of conformity
0761 - CPD - 0247. Its category according to EN 13501-3 is EI
90 (v
e
, ho i
↔
o) S.
Housing made of galvanised sheet steel, with moulded-on
plug connections (S model) or with connection flanges ac-
cording to EN 12220 or DIN 24154-1 (F model). Damper bla-
de made of abrasion-resistant, mineral silicate boards Wear-
resistant elastomer seal on the damper blade and intu-
mescent seal to meet the cold and hot leakage requirements
according to DIN EN 1366-2.
Any accessories that may be required for the respective
mounting situation are listed in separate positions of the bill
of quantities.
For connection to ventilation ducts (one- or two-sided), any
air flow direction
Connection to smoke detectors with general building super-
visory approval (Germany) possible.
When using the smoke detection system type RMS, the addi-
tional information in the Technical Documentation of the
smoke detection system must be observed.
Installation:
in solid walls
Make: SCHAKO
type BSK-RPR-EU
Declaration of performance no.
09-48-DoP-BSK-RPR-EU-
2013-07-01
Dimensions::
Diameter: ....................
mm
Length (L):
455/
580
mm (
-S
model)
375/500 mm (-F model)
(Unless stated otherwise, the mechanical -S model (plug-in
connection), length 580 mm and fusible link trigger tempera-
ture 72°C /thermomechanical) will be delivered).
Alternative designs or accessories (at an extra charge)
("Select as required")
Model made of stainless steel material no. 1.4301
(V2A)
Stainless steel model with material no. 1.4571
(V4A - All replaceable, non-coated parts are made
of stainless steel material no. 1.4301 (V2A)).
Housing with DD coating (solvent-containing two-
component top coat based on polyurethane var-
nish - RAL 7035 / light-grey) inside / outside
Housing with powder coating (RAL 9010 / pure
white) -inside and outside-
Electric limit switch type ES for "OPEN" and/or
"CLOSED" position indicators, switching element
containing one NC and one NO contact:
o
Type ES 1 Z: "CLOSED"
o
Type ES 1 A: "OPEN"
o
Type ES 2: "OPEN" and "CLOSED"
Limit switch type Easy-Eco-Tx, for connection to
SCHAKO signalling and switching bus system
EasyBus, the status of the damper position being
transferred by radio signal. Additional radio recei-
ver type Easy-Eco-Rx required.
Electric spring return actuator with thermoelectric
release device BAT
Triggers at a duct inside temperature of 72°C
containing integrated micro switches for indi-
cation of damper end positions (24 V drive with
connector):
o
Type
B10 (BFL24-T-ST SO) or
B11 (BFL230-T SO)
Extension piece type VT-RF
(flange connection), for installa-
tion with large wall thicknesses; to maintain the minimum
distance a
min
= 50 mm from the open damper blade when fit-
ting finishing protective grating type ASG-RF. Extension piece
made of profiled galvanised sheet steel with connection
flanges, L=160 mm (nominal sizes 100 - 450), L=190 mm
(nominal size 500).
Product: SCHAKO
type VT-RF
Dimensions
:
Diameter: ....................
mm
Extra charge for anticorrosive paint - insi-
de/outside -
- DD coating (two-component top coat based on
polyurethane varnish - RAL 7035 / light-grey)
Extra charge for powder coating (RAL 9010 / pure
white) -inside and outside-
Extra charge for design:
- Material no. 1.4301 (V2A)
- Material no. 1.4571 (V4A)
Round duct assembly part type REBT
(plug-in connection)
for simple duct installation of the smoke detector in round
ventilation ducts. Consisting of galvanised sheet steel,
painted black matt on the inside, L=300 mm. Delivery is per-
formed with attached maintenance cover. Smoke detector
and lip seals are not included in the scope of delivery. When
ordering REBT with smoke detector, the maintenance cover
is mounted ex factory at this position.
Make: SCHAKO
type REBT
Dimensions
:
Diameter: ....................
mm
Extra charge for model:
-Material no. 1.4301 (V2A)
-Material no. 1.4571 (V4A)
