DIN EN 55011:2009 + A1:2010 / Group 1 / Class A
Industrial, scientific and medical equipment - Radio-
frequency disturbance characteristics - Limits and
methods of measurement
Class B limits (devices for usage in domestic establish-
ments) are met with an additional ferrite attached to the
USB connector cable (camera side).
The product complies with the following standards and
directives:
2014/30/EU
EMC Directive
DIN EN 61326-1:2013
Electrical equipment for measurement, control and
laboratory use – EMC requirements
Part 1: General requirements
CE-Conformity
Instruction Manual
SK1024U3HU
shar
ed_CE-Conformity_W
arranty_ML.indd
29
Instruction Manual SK1024U3HU © 2019-07 E
Copyright ©
Unless explicitly allowed, distribution, sale or use of this document or its contents, for purposes other than
those intended, is forbidden. Repeated transgressions will lead to prosecution and demands for compensation.
All rights of patent protection and registration or copyright of a product or its design lie with Schäfter+Kirchhoff.
Schäfter+Kirchhoff GmbH and the Schäfter+Kirchhoff logo are registered trademarks.
We reserve the right to improve or change specifications so that the system description and depictions in the
Instruction Manual may differ in detail from the system actually supplied. The Instruction Manual is not covered
by an update service.
Date of document publication: 15.07.2019
Schäfter+Kirchhoff GmbH
Tel.: +49 40 853 997-0
Kieler Straße 212
Fax: +49 40 853 997-79
22525 Hamburg
Email: [email protected]
Germany Internet:
www.SuKHamburg.com
This manual has been prepared and reviewed as carefully
as possible but no warranty is given or implied for any
errors of fact or in interpretation that may arise. If an error
is suspected then the reader is kindly requested to inform
us for appropriate action.
The circuits, descriptions and tables may be subject to
and are not meant to infringe upon the rights of a third
party and are provided for informational purposes only.
The technical descriptions are general in nature and
apply only to an assembly group. A particular feature
set, as well as its suitability for a particular purpose, is
not guaranteed.
Each product is subjected to a quality control process.
If a failure should occur then please contact the supplier
or Schäfter + Kirchhoff immediately.
The warranty period covers the 24 months from the
delivery date. After the warranty has expired, the manufac-
turer guarantees an additional 6 months warranty for all
repaired or substituted product components.
Warranty does not apply to any damage resulting from
misuse, inappropriate modification or neglect. The
warranty also expires if the product is opened. The
manufacturer is not liable for consequential damage.
If a failure occurs during the warranty period then the
product will be replaced, calibrated or repaired without
further charge. Freight costs must be paid by the sender.
The manufacturer reserves the right to exchange compo-
nents of the product instead of making a repair. If the
failure results from misuse or neglect then the user
must pay for the repair. A cost estimate can be provided
beforehand.
Warranty
