Fiber Collimators Series 60FC-SF
Adjustment_60FC-SF 09.12.2020 © Schäfter+Kirchhoff GmbH
Schäfter+Kirchhoff GmbH Kieler Str. 212 22525 Hamburg, Germany +49 40 85 39 97-0 [email protected] www.sukhamburg.com
3
2. Attaching a Fiber Cable to the Fiber Collimator
For attaching a fiber cable to the fiber collimator perform the following steps:
Figure 4:
To prevent damage to the sensitive
fiber end-face, always insert the fiber
connector‘s ferrule
A
at an angle, with
the connector key
B
properly aligned
to the receptacle notch
C
.
Figure 5:
When the ferrule tip is safely located
in the inner cylinder of the receptacle,
align the connector to the
receptacle axis and carefully introduce
the connector into the collimator.
Figure 6:
Then, orient the connector key in a
way that it is pressed gently onto
the right-hand side of the receptacle
notch.
Figure 7:
Gently screw on the connector cap
nut onto the receptacle until it is
finger-tight.
A
B
C
