The AC Connection
— 4 —
The AC Connection
♦
=
Locate the AC port on the rear of the monitor (refer to
Figure 3
).
♦
=
Plug the female end of the AC cord into the AC port.
♦
=
Plug the male end into the power supply.
Figure 3: Connecting the Power Cord
The Signal Cable Connection
♦
=
Make sure that the monitor is powered
Off
. When powered off the
Power LED (see
Figure 2
) will not be lit.
♦
=
Locate the VGA port on the rear of the PC. The signal cable has a
standard 15-pin mini D-sub (VGA) connector. If you are having trou-
ble locating the VGA port, please refer to the documentation, which
came with your PC.
♦
=
Connect the Signal cable to the PC’s VGA port.
Figure 4: Connecting the Signal Cable
Summary of Contents for D54
Page 4: ......
