10 •
ELEMENT FIVE - User Manual
ELEMENT FIVE - User Manual
• 11
EN
EN
FR
FR
PL
PL
CZ
CZ
8.
Tighten the clamping sleeve with the special wrench
2
9.
Screw the front nozzle on the tool
During the warranty period, the customer must not perform any alterations other than
those permitted by the manufacturer (maintenance). The repairs must be done by an
authorized serice center.
To admit warranty repair, the customer must return the defective tool to the service center
of the manufacturer with the proof of purchase. Warranty is valid only if the tool is in
its warranty period (12 months from the date of purchase confirmed by the proof of
purchase) and if the conditions of use have been respected.
Warranty is not valid if worn spare parts have to be replaced (further to a normal use of
the tool).
This product (including battery and charger) shall not be treated as household waste.
It shall be handed over the applicable collection point for the recycling of electrical
and electric equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product. The recycling
of materials will help to conserve natural ressources. For more detailed information about
recycling of this product, please contact your local city office, your household waste
disposal service or the shop where you purchased the product.
10.
Tighten the front nozzle with the special wrench
1
Where
Cause
Solution
Nosepiece
Wrong nosepiece
mounted
Mount a correct nosepiece according to the
NOSEPIECES table §1 p.5.
Worn nosepiece
Replace by a new one
Jaws set
Mandrel blocked in jaws
set
Clean/replace the jaw set by the additionnal
set provided in the pack or order a new
jawset
Mandrel collecter full
(>100 mandrels)
Unmount and empty the mandrel container
Pusher
Worn pusher
Clean/replace the pusher
The mandrel is stuck.
6
TROUBLESHOOTING
7
WARRANTY CONDITIONS
8
DISPOSAL OF OLD
ELECTRICAL & ELECTRIC
EQUIPMENT
CAUTION
If the broken mandrel is not ejected in the mandrel container, it is due to an excess of
grease. Carefully, give the mandrel container a whack or use compressed air to try to
eject it
