GB
INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
Read this instruction manual carefully to prevent
any unit damage or injure when using.
When using this appliance, basic precautions
should always be followed:
Before the first use of the appliance check that
the voltage indicated on the rating label
corresponds to the mains voltage in your home.
For home use only. Do not use for industrial
purposes.
To reduce the risk of electric shock, do not use
outdoors or on wet surfaces. Do not immerse unit
or cord in any liquids.
To prevent risk of electric shock and fire, do not
immerse the appliance in water or any other
liquids. If it has happened DO NOT TOUCH the
appliance, unplug it immediately and check in a
service center.
Do not handle the plug with wet hands. Never
switch off the appliance by pulling the cord.
Do not let the cord hang over sharp edges or
touch hot surfaces.
Always unplug the appliance from the power
supply when not in use and before servicing.
Do not use appliance with damaged cord or
other defects. Do not attempt to repair the
appliance, adjust or replace any parts. In case of
malfunction, contact the authorized service center
for examination, repair, electrical or mechanical
adjustment.
To avoid deforming of plastic components of the
appliance or fire accident, never leave the
appliance exposed to direct sun light or near any
heater.
This appliance is not intended for use by
persons
(including
children)
with
reduced
physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have
been given supervision or instruction concerning
use of the appliances by a person responsible for
their safety.
Children should be supervised to ensure that
they do not play with the appliance.
To avoid damage of the flexible hose, do not
fold or pull it strongly.
Do not put any object into air outlets. Do not use
with outlet blocked. Keep free of dust, hair and
anything that may reduce airflow.
Be careful when cleaning on stairs.
Before you start using the vacuum cleaner,
please remove all large or sharp objects from the
floor in order to prevent damage of the unit.
CAUTION: To avoid voltage overload do not
plug the unit and other powerful electrical
appliances to the power supply at the same time.
Never use the vacuum cleaner without filters.
Do not use the appliance on wet surfaces. This
unit does not absorb water.
If you have cleaned the carpet with liquid
detergent, let the carpet dry up completely
before vacuuming it.
Never use the appliance without dust bin.
Replace the dust bin without delay if it is
damaged.
Do not attempt to repair, adjust or replace
parts in the appliance. Repair the malfunctioning
appliance in the nearest service center.
If the product has been exposed to
temperatures below 0 ºC for some time it should
be kept at room temperature for at least 2 hours
before turning it on.
The manufacturer reserves the right to
introduce minor changes into the product design
without prior notice, unless such changes
influence significantly the product safety,
performance, and functions.
Production date mentioned on the unit and/or
on the packing materials and documentations.
VACUUM CLEANER ASSEMBLING
Insert the flexible hose into the air inlet and
press until it clicks into proper position.
To remove the hose, press the button on hose
base, then pull to remove it from the attachment
point.
Extend the telescopic tube to the desired
length.
Insert the hose into the tube.
Attach a nozzle to the tube:
Floor brush is intended for cleaning bare floor
and floor coverings.
«Crevice-furniture» nozzle is for cleaning sofa,
curtain or dust on the decorative surfaces,
corners and between cushions. To clean
furniture and decorative surfaces turn the nozzle
in the arrow shown direction.
INSTRUCTION FOR USE
Before starting, unwind the cord to sufficient
length and insert the plug into the power supply.
The yellow mark on the cord shows optimal cord
length. Do not unwind the cord beyond the red
mark.
Press On/Off button to switch the unit on and
press again to stop it.
You can adjust the air flow using the air flow
regulator on the flexible hose handle:Decrease
flow for cleaning curtains, books, furniture,
etc.Increase flow for cleaning bare floor.
To rewind the cord, press the rewind button
and guide the cord with hand to ensure that it
does not whip causing damage.
To prevent motor overheating do not work
continuously longer than 30 minutes and
obligatory stop the vacuum cleaner for no less
than 15 min.
ADVANTAGES
OF
YOUR
VACUUM
CLEANER
Your vacuum cleaner features a five-level air
filtration system:
A three-layer cloth dust collector.
