Scarlett SC-4141, Instruction Manual

Page: 4 / 18

www.scarlett-europe.com SC-4141
4
GB INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
·
Before the first connecting of the appliance check that voltage indicated on the rating label corresponds to the mains
voltage in your home.
·
For home use only. Do not use for industrial purposes. Do not use the appliance for any other purposes than described
in this instruction manual.
·
Do not use outdoors.
·
Always unplug the appliance from the power supply before cleaning and when not in use.
·
To prevent risk of electric shock and fire, do not immerse the appliance in water or in any other liquids.
·
Close supervision is necessary when it is used near children or invalids.
·
Do not leave the appliance switched on when not in use.
·
Do not use other attachments than those supplied.
·
Do not operate after malfunction or cord damage.
·
Do not attempt to repair, adjust or replace parts in the appliance. Check and repair the malfunctioning appliance in the
nearest service center only.
·
Keep the cord away from sharp edges and hot surfaces.
·
Do not pull, twist, or wrap the power cord around appliance.
·
Never attempt to take food or liquid out from the container when the blade is moving. Always wait until the motor stops
completely.
·
Do not overload the appliance with a food.
FOOD PROCESSOR ASSEMBLING
·
Before the first using, wash all removable parts in warm soapy water, rinse thoroughly and dry. Wipe the housing with a
damp cloth.
·
Never immerse motor body in any liquid or wash under running water.
·
Place the motor unit on a level surface.
CAUTION: Do not operate continuously longer than 3 minutes with less than 1 minute intermission . (Grinder: 0,5
min / 3 min).
·
Do not remove any parts during the operating.
BLENDER
·
Fit the blender jar onto the motor unit and turn it counterclockwise to make the two parts integral (fig.1).
·
Put ingredients into blender jar, and close it with the lid.
·
Insert stopper into the lid and then put the lid onto the blender jug. Make sure all parts securely fitted.
·
Plug-in, turn the switch/press buttons to recommended speed:
"1"(low speed) for liquid ingredients mainly.
"2" (high speed) for heavier processing, i.e. liquid and solid ingredients mixtures.
- PULSE mode.
·
Blender could process fruit juices, ice-cocktail, etc.
CAUTIONS:
·
Avoid operating the empty blender;
·
Never place hot ingredients into blender jar (> 70 ºC);
·
Ingredients must be cut into small pieces before processing in blender jar;
·
Never fill blender jar with a liquid over maximum level marked;
·
You may add extra ingredients from the top of the jar after taking off the insert;
·
When processing is finished, switch off, and then unplug the appliance and wait the motor will stop before removing a
food and attachments.
GRINDER
·
Load products to be processed in the bowl.
·
Fit blade unit into the bowl.
·
Do not forget to fix rubber collar onto blade unit.
·
Screw cutting knife support (counterclockwise ) in the bowl/
·
Fit the grinder unit onto the motor body and rotate it in counterclockwise direction.
·
Preferably use the grinder in pulse mode.
CLEANING AND CARE
·
Switch off and unplug the appliance.
·
Wash the accessories immediately and avoid soaking them in water for long periods; wash in warm sudsy water after
each use. Dry all accessories with a clean soft cloth.
·
Wipe housing with a damp cloth.
·
Do not use scouring pads, abrasive and harsh detergents.
·
DO NOT IMMERSE THE MOTOR UNIT IN ANY LIQUID OR IN A DISHWASHER.
CAUTION : The blades are extremely sharp and therefore dangerous. Handle with caution!
STORAGE
·
Be sure that the appliance is unplugged.
·
Complete all requirements of Chapter CLEANING AND CARE.
·
Keep the appliance in a dry clean place.