www.scarlett-europe.com
SC-147
4
GB
INSTRUCTION MANUAL
DESCRIPTION
1. Motor
unit
2. Bowl
3. Bowl drive shaft
4. Bowl
lid
5. Locking
tab
6. Crushing
knife
7. Supporting
disc
8. Fine
grater
9. Slicer
10. Shaft adaptor
11. Whisk stick
JUICE EXTRACTOR SET
12. Collar
13. Filter band
14. Extractor
CITRUS PRESS SET
15. Cone
16. Strainer
17. Citrus press shaft
18. Food pusher
19. Spatula/plastic knife
20. Speed control switch
21. Auto clean button
22. Pulse button (P)
IMPORTANT SAFEGUARDS
·
Before the first connecting of the appliance check that voltage indicated on the rating label corresponds to the mains voltage in your home.
·
For home use only. Do not use for industrial purposes. Do not use the appliance for any other purposes than described in this instruction manual.
·
Do not use outdoors.
·
Always unplug the appliance from the power supply before cleaning and when not in use.
·
To prevent risk of electric shock and fire, do not immerse the appliance in water or in any other liquids.
·
Close supervision is necessary when it is used near children or invalids.
·
Do not leave the appliance switched on when not in use.
·
Do not use other attachments than those supplied.
·
Do not operate after malfunction or cord damage.
·
Do not attempt to repair, adjust or replace parts in the appliance. Check and repair the malfunctioning appliance in the nearest service center
only.
·
Keep the cord away from sharp edges and hot surfaces.
·
Do not pull, twist, or wrap the power cord around appliance.
·
Never attempt to take food or liquid out from the container when the blade is moving. Always wait until the motor stops completely.
·
Do not overload the appliance with a food.
·
The appliance operates fast and effective.
Do not operate continuously for more than 1 min
.
FOOD PROCESSOR ASSEMBLING
·
Before the first using, wash all removable parts in warm soapy water, rinse thoroughly and dry. Wipe the housing with a damp cloth.
·
Never immerse motor body in any liquid or wash under running water.
·
Place the motor unit on a level surface.
·
Place the processor bowl onto the bowl shaft. Make sure the three pillars around the bowl shaft are inserted into the three slots on the bottom of
the processor bowl.
ATTACHMENTS
CUTTING KNIFE (pic.1)
·
Fit the cutting knife on the drive spindle.
·
Start processing at high speed (position II ).
·
You can chop up to 1 kg of foodstuff including vegetables, raw or cooked meat or fish.
DISKS - GRATING / SLICING (pic.2)
·
For grating insert the spindle into the center of the reversible grating/slicing disk side facing up so that the three protrusions around the spindle
penetrate the three slots around the center of the disk. Rotate the disk by gripping the spindle and go as far as it can in order to lock it into the
disk.
·
For grating it must be with the grating blade side facing up.
·
For slicing turn it over.
·
Fit the disk with the spindle onto the shaft.
·
Switch Speeds control at (slow speed) to start.
CITRUS PRESS SET (pic.3)
·
Place the citrus press shaft on the bowl shaft.
·
Place the strainer on the bowl then turn the handle until it locks into the bowl lid-locking slot.
·
Place the cone into the hole in the strainer.
·
Press on a half of a fruit to the cone.
·
Turn Speeds control switch to (slow speed) to start the appliance. For greater control use the Pulse mode.
JUICE EXTRACTOR SET (pic.4)
·
Place the filter band into the extractor.
·
Cover the collar on the extractor. Make sure the filter band is in place.
·
Place the extractor assembly on the bowl shaft.
·
Wash and peel fruit if necessary. Some fruit have stones, which must be removed before extracting.
·
Switch Speed control to II (fast speed) to start the appliance.
·
Clean the filter band frequently.
WHISK STICK (pic.5)
·
Place the whisk stick on the bowl shaft.
·
Whisk stick is used for mixing egg whites cream and mayonnaise.
·
Switch Speed control to (slow speed) to start the appliance.
·
Never use the whisk stick to knead heavy dough.
·
Place lid on the bowl and rotate it to lock.
NOTE:
you must complete assembling fully; otherwise you cannot switch on device.
FOOD PROCESSOR USING
·
Please make sure accessories are at its places before switching on.
·
Plug-in device.
PULSE MODE
·
Turn Speeds control switch at
position.
·
Press and retain the Pulse button - food processor will operate till this button is pressed.
HOW TO OPERATE
·
Before processing cut a food so it would pass through a feeder easily.
·
Turn control switch to speed (low speed) or II (high speed), so food processor will work continuously until you turn back to "0" (switch off a
speed).
·
Gradually feed products to be processed through the feed tube
only while processor is operating
.
CAUTION:
Use the pusher (I) only to feed products, push it evenly and gently. The heavier pressure, the coarser chopping.
CAUTION:
Do not operate continuously longer than 1 minutes with less than 2 minute intermission
.
