6
GB
INSTRUCTION MANUAL
•
The chopper is not suitable for crushing ice and
chopping hard products, such as coffee grains,
nutmegs.
•
Caution! The chopping blade is very sharp! Hold the
blade by the top plastic area only!
•
Place shaft on the central axle of the bowl.
•
Put the grinding blade on the shaft.
•
Add ingredients into the jar.
•
Cover the jar with the drive.
•
Turn the bowl drive aligning the lock with the handle
slot. The bowl drive will secure.
•
Rotate the bowl drive, so that the protrusion of the bowl
handle matches the slot of the drive. The drive will lock.
•
Insert the motor unit into the bowl drive and rotate it
clockwise.
•
When finished, remove the motor base first.
•
After use, first detach the motor unit, turning it counter-
clockwise.
•
Then remove the jar drive.
•
Remove the blade carefully.
•
At this point you may remove chopped ingredients from
the jar.
DISC FOR SLICING AND CHOPPING
•
This disc is designed for slicing and chopping
vegetables, such as cucumbers, carrots, potatoes,
leeks and onions, as well as some varieties of cheese.
•
Place the bowl shaft on the bowl pin.
•
Insert the slicing and chopping attachment into the disk.
•
Place the slicing and chopping disc on the shaft.
•
Put the drive on the bowl.
•
Place the motor unit on the bowl drive.
•
WARNING! Feed the food with pusher only, pressing it
gently.
ACESSORY FOR WHISKING / LIQUID PRODUCTS
BLENDING
•
Use the whisk for creaming, eggbeating, desserts
blending. Never use this accessory for kneading.
•
While turning the attachment slightly, insert it into the
adapter until it locks.
•
Put the adapter connected to the attachment on the
motor unit, turning it clockwise.
•
Prior to start processing, immerse the whisk into the jar
with ingredients.
•
NOTE: Should the assembly is incorrect or incomplete,
the processor will not operate.
DICER DISC
•
This disc is designed for dicing cheese, meat,
vegetables and other food products.
•
Insert the dicer attachment into the attachment slot of
the disc.
•
Place the blade attachment on the top.
•
Install the disc inside the bowl, so that its lips match the
bowl slots.
•
Put the drive on the bowl.
•
Place the motor unit on the bowl drive.
•
WARNING! Feed the food with pusher only, pressing it
gently.
•
The attachment is very sharp! Be careful during
removal of the attachment from the disc. To remove the
attachment, press it with the supplied pusher.
FOOD PROCESSOR USING
•
Please make sure accessories are at their places before
switching on.
•
Plug-in device.
•
Press and hold the Pulse button – food processor will
operate while this button is pressed.
•
To process liquid and hard ingredients together, use II
mode.
Summary of Contents for Indigo Innovation IS-HB44K03
Page 1: ......
