SCARAB M6 SWEEPER KIT
23
Operator’s Manual
Amdt.1 - 03 November 2009
KEY MAINTENANCE PROCEDURES
AUXILIARY ENGINE
The operator’s responsibility for the auxiliary power unit is the same as for
any other engine, including the chassis manufacturer’s unit. The following
instructions should be followed as detailed in the maintenance schedule
on Page 21 and in the manufacturer’s recommendations.
1.
Raise the hopper in accordance with the instructions detailed on
2.
Allow a suitable period of time to elapse to enable an accurate
reading of the oil level in the sump and for the cooling system’s
pressure/temperature to drop.
3.
Carry out the fluid-level checks as follows:
(a)
Visually check the coolant level in the reservoir. If the level is at
or below the minimum level indicator, top up the system using
the correct coolant mixture as detailed in the table on Page 27.
(b)
Using the dipstick, check the oil level in the engine’s sump. If the
level is at or below the minimum level indicator, top up the
system using the correct lubricant as detailed on Page 27.
Fig. 9 The Auxiliary Engine Installation
COOLANT
AIR CLEANER
OIL FILLER CAP
ENGINE DIPSTICK
DRIVE PUMPS
RESERVOIR
HYDRAULIC RETURN
FILTER & GAUGE
COOLER
HYDRAULIC OIL TANK
HYDRAULIC
BREATHER/FILLER
FUEL FILLER
FUEL TANK
If it is considered that the engine is loosing coolant or oil at an excessive rate, report
the matter as soon as possible to your supervisor or service personnel.
