SCARAB M6 SWEEPER KIT
11
Operator’s Manual
Amdt.1 - 03 November 2009
SIDE BRUSH SWING IN/OUT SWITCH
- Press to swing brushes OUT.
Press again to swing brushes IN. The red LED illuminates while the
brushes are in the swung OUT position.
NOZZLE TILT SWITCH (MOMENTARY MODE)
- Press and hold to tilt the
suction nozzle for larger items, such as bottles. The red LED illuminates
when the switch is activated. Release the switch to revert to normal.
Fig. 4 Sweeper Control Panel Layout
BEACONS
AUXILIARY ENGINE STOP
AUXILIARY ENGINE
PANEL ON/STAND-BY
LEFT HAND
LEFT NOZZLE
WIDESWEEP
LEFT SIDE WATER
RIGHT HAND
RIGHT NOZZLE
RIGHT SIDE WATER
LEFT SIDE
RIGHT SIDE
HIGH-PRESSURE WATER PUMP •
LIQUID CRYSTAL DISPLAY
AMBIENT LIGHT
START
SENSOR
(LCD SCREEN)
WORK LIGHTS
RAISE/LOWER
SIDE-BRUSH
WORK LIGHTS
SIDE-BRUSH
RAISE/LOWER
SUCTION FAN
WIDESWEEP WATER
• optional equipment
SIDE BRUSH
NOZZLE TILT (MOMENTARY)
When in Sweep Mode:
UPPER LINE = ENGINE SPEED
LOWER LINE = WATER TEMPERATURE / WARNINGS
MANUAL
PRE-HEATERS
SWING IN/OUT
NOZZLE TILT (LOCKING)
SWEEP MASTER
SWITCH
SIDE BRUSH DOWN PRESSURE •
OPTION
BRUSH ‘DOWN-PRESSURE’ SWITCH
*
- Press to allow a controlled
amount of pressure to the top of the brush lift ram(s) to increase the
brush’s surface pressure. Use in conjunction with the air-pressure
regulator(s). The red LED illuminates when the feature is selected. Brush
pressure will not function unless the Sweep Master switch is activated.
NOZZLE TILT SWITCH (LOCKING MODE)
- Press to tilt the nozzle
permanently to the raised position. The red LED illuminates while the
feature is active. Press again to return the nozzle to normal.
