2 of 10
496330 Issue 1
Introduction
The 9452 and 9453 are fully programmable 4 zone control units designed to
meet the requirements of both domestic and small commercial installations.
The basic 9452 system comprises a main control panel complete with built-in
keypad, while the 9453 system comprises a blank end station and one
remote keypad. The 9452 control unit and 9453 end station both house the
system electronics, power supply, battery and remote signalling device (if
fitted). A numeric keypad and row of indicators (LEDs) are provided only on
the 9452 control unit, from which the user and installer perform the system
operation.
Remote keypads provide the user with the facility to set and unset the system
from strategic locations within the premises and allow the installer to pro-
gramme the system. Up to TWO remote keypads may be connected to the
9452/3. A numeric keypad and row of indicators (LEDs) are also provided on
the keypads to perform the system operation. The keypads also have an
optional key press PA facility, if required.
Technical Specification
Zones
Four plus PA, Entry/Exit and global tamper.
Display
LED.
Keypads
One built-in (9452 only) plus up to two remote keypads
(9425).
Expansion
None.
BS 4737
Full Spec.
Log
15 events.
Panel Siren
Yes.
Extension Spkr
9040, 2 max if Internal Speaker is disconnected.
Battery
1.9Ah.
12 Volt Power
Quiescent Panel 70mA.
9425 RKP = 40mA.
12 V Aux Output
350mA.
Dimensions
Panel: h x w x d 163 x 257 x 72mm.
RKP: h x w x d 115 x 115 x 28mm.
Weight
Panel 1.2Kg.
Comms Output
PA, Intruder, Open/Close.
Input
Line fault.
Outputs
SAB/SCB, Strobe, Prog O/P (PIR set latch or SD reset).
9452/3
