COMPACT 110
COMPACT 110
Operator’s manual for drilling machine
- 8 -
Installing the milling cutter:
1. Raise the drive and the slide (2) up using the lever (3);
2. Raise the guard (1) to the maximum in order to attain access to the arbor (4) screws (5);
3. Insert the appropriate type of pilot (6) into the milling cutter (7);
4. Position the milling cutter (7) with the cutter facing up, so that the flat sides of the milling
cutter are found facing the screws (5)
5. Put the milling cutter (7) into the arbor socket (4);
6. Tighten the screws securely (5).
Uninstalling the milling cutter:
1. Raise the drive and the slide (2) up using the lever (3);
2. Raise the guard (1) to the maximum in order to attain access to the arbor (4) screws (5).
3. Loosen the screws (5);
4.
Remove the milling cutter (7) and the pilot (6) from the arbor socket (4).
2. Magnetic drilling machine start up
The machine is supplied in a metal box with complete standard equipment.
COMPACT 110 comes in a standard equipment set which consists of:
•
metal box
1pc
•
drilling machine
1pc
