13
12
Start-up the unit
Insert the battery
Open the battery cover and insert the AA 1.5 volt battery according to
the correct polarity.
Power / Measurement
1. Press
‘ON/OFF’- Button, directly to power on and start
measurement.
2. Release inger to hold the last reading and see the last,
Maximum and Minimum readings every 2 seconds in turn.
°C / °F Measurement Unit Conversion
Take off battery cover and use a pen to shift the scale switch
Hold Maximum Minimum
o
o
o
C
o
F
LCD ERROR messages
The Infrared thermometer incorporates visual diagnostic messages
as follows:
Battery changing
When the ‘Low Battery’ icon indicates the battery is low, the battery
should be replaced immediately with a AA battery. The battery is
located under the battery cover at the rear of the thermometer.
- Slide the battery cover out
- Take off the old battery and put a new AA battery into battery compartment.
Battery status indicator
‘Battery OK’:
measurements
are possible
‘Battery Low’:
battery needs to be
replaced, measure
-
ments are possible
‘Battery depleted’:
measurements are
not possible
‘Hi’ or ’Lo’ is displayed when the tempe
-
rature being measured is outside of the
range of the instrument, ‘Hi’ when higher
than +500°C (932°F) and ‘Lo’ when
lower than -33°C (-27°F).
‘Er2
rapid
‘Er1
th
The
th
‘Hi
outside of the range of the
‘Er2’ is displayed when the Infrared thermometer is
exposed to rapid changes in the ambient tempera
-
ture.
