Scantech Pollux P-4010 User Manual Download Page 4

Page: 4 / 40

, Scantech

-ID

BV.

This manual is copyrighted, with all rights reserved. Under the copyright laws, this manual may not, in
whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic medium
or machine readable form without prior written consent of Scantech

-ID

BV.

Limited Warranty

Under all circumstances this manual should be read attentively, before installing and/or using the pro-
duct. In no event Scantech

-ID

BV will be liable for any direct, indirect, special, consequential or

incidental damages arising out of the use or inability to use this documentation or product, even if
advised of the possibility of such damages. In particular, Scantech

-ID

BV shall not be liable for

any

hardware, software, or data that is stored or used with the product, including the cost of repairing,
replacing or recovering the above. Scantech

-ID

BV reserves the right to change parts of the

device

at any time without preceding or direct announcement to the client.

Scantech

-ID

BV reserves the right to revise this manual, and to make changes in the contents

without

obligation to notify any person or entity of the revision or change. A serial number appears on

the

product. Make sure that this official registration number has not been removed. It should be used
whenever servicing by Scantech

-ID

BV or an authorized Scantech dealer is necessary.

Important

This equipment has been tested and found to comply with the limits for a Class B digital device, pur-
suant to EN55022, and with the limits for a class A digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference when the equip-
ment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the user’s manual, may cause harmful
interference to radio communications. Operation of the equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own
expense. Any unauthorized changes or modifications to this equipment could void the user’s authority to
operate this equipment.

For CE-countries:

- The Pollux is in conformity with the CE standards. Please note that a Scantech CE-marked power

supply unit should be used to conform to these standards.

For USA & Canada:

- To be used with UL listed and CSA certified computers/POS systems. This scanner should only be po-

wered by a UL Listed/CSA Certified power supply having Limited Power Source or Class2 outputs,
rated + 5 V dc/0.75A, + 12 V dc/1A, -12 V dc/0.05A and minimum 40 degrees Celcius operating
environment.

- À utiliser avec des ordinateurs/systèmes POS registrés UL/certifiés CSA.

Radio and television interference

Operation of this equipment in a residential area can cause interference to radio or television reception.
This can be determined by turning the equipment off and on. The user is encouraged to try to correct
the interference by one or more of the following measures:

• Re-orientate the receiving antenna
• Relocate the device with respect to the receiver
• Move the device away from the receiver
• Plug the device into a different outlet in order to have the device and

receiver on different branch circuits

If necessary, the user should consult the manufacturer, an authorized Scantech dealer or experienced
radio/television technician for additional suggestions. The booklet

"How to Identify and Resolve Radio-TV

Interference Problems"

, prepared by the Federal Communications Commission, can be of help. It can be

obtained from the U.S. Government Printing Office, Washington, DC 20402, Stock No. 004000003454.

P/N A0920013

January

200

Pollux_UserM_Deel1.qxd 14-11-2002 09:05 Pagina b