UNPACKING INSTRUCTIONS
The installation of the SCANMAX 25 is relatively simple and requires no special tools. It is shipped as a
whole in a sturdy ply wood container mounted on a wooden pallet. The shipping crate is designed to
withstand normal handling during overseas shipments.
Despite these safeguards, damage may occur in transit. Therefore, immediately inspect the exterior of the
container for evidence of damage. In the event damage has occurred, immediately notify the carrier at your
location.
UNPACKING THE SCANMAX 25
To remove the SCANMAX from the shipping crate, perform the following:
1. Undo the binding and open the box with the help of a large screwdriver.
2. Using extreme care, remove the pallet and lift the equipment into place. For this use a lifting trolley
or fork-lift truck. Care must be taken to avoid scratching the unit.
3. Inspect the SCANMAX cabinet for evidence of any physical damage.
WARNING: Physical damage to the SCANMAX cabinet may result in excessive radiation emission
levels. Any damage observed should be thoroughly investigated, prior to operating
the unit and must not be used until authorised.
