SCANMASKIN Scan Helicopter, Manual

Page: 43 / 60

Scan Helicopter – Manual
- 15 -
3 Operation
3.1 Precautions
Any machine, if it is not used according the regulations, may be hazardous for operating,
setting-up and service personnel. The operating authority is responsible for compliance with
the safety regulations during operation and maintenance, and for the use of safety devices
supplied with the machine, as well as the provision of appropriate additional safety devices!
Never operate the machine without proper blades.
Eye, ear and safety shoe protection must be worn at all times.
Never operate the machine when it’s in its upright position.
Make sure there is no debris in the work area.
Check the work area for screws or other hard objects in the concrete. Don’t use the machine
if there are any foreign objects stuck out from the surface. Before operate the machine such
objects must be removed.
Read “2
Safety Regulations
” before operating the machine.
The machine is equipped with a thermal protection circuit that will shut down the machine in
the event of high motor temperature. Wait at least 15 minutes before operating the machine
again if this occurs.
43
ENGLISH SCAN HELICOPTER POWER TROWEL
www.scanmaskin.com