Scan Helicopter – Manual
- 5 -
1 Specifications
The Scan Helicopter is available in to power inlets, operated with battery pack or operated with
230Volt cable. This is described later on in this chapter.
1.1 Electrical specifications
To find the specifications that apply to your machine, check the information plate on the machine.
Never connect the Scan Helicopter to any other voltage than described in this specification.
The power source must be fused according to “External fuse” in this specification; also
the cables used must be marked and rated in accordance with the fuse used. Failure to
comply with the correct fuses may cause fire or injuries.
Power choice
230 V 1~ both
machines
110 V 1~ only
battery model
Current
10 A
10 A
Voltage
200 – 240 V 1~
100 – 130 V 1~
Frequency
50 Hz +/- 5%
50 Hz +/- 5%
External fuse
1
10 A
10 A
Power inlet
2
CEE 7/7 – 250V
16A + PE
Local standard
Table 1-1
Electrical specifications
All models are CE-marked.
35
35
36
37
37
38
39
39
39
39
41
41
42
43
43
43
44
44
45
45
46
46
46
47
47
48
48
48
48
49
49
49
49
50
53
54
55
56
57
57
57
58
58
33
ENGLISH
SCAN HELICOPTER POWER TROWEL
www.scanmaskin.com
Summary of Contents for Scan Helicopter
