SCANMASKIN Scan Helicopter, Manual

Page: 41 / 60

Scan Helicopter – Manual
- 13 -
2.6.1 Cables
Only use cables that are marked and rated according to the specifications in “ 1.1 Electrical
specifications ”. Don’t use excessive length of the cables. If a very long cable is needed we
recommend that you use a cable rated for more current and connect it to a distribution
central near the machine. Never lay the cable in a loop when operating the machine, this will
cause the cable to heat up and may cause fire. See “
Figure 2-1
” for explanation.
Figure 2-1 Recommended way to handle excessive cable length.
2.7 Definition of the “Safety off position”
The machine is in a safe condition where it cannot be any hazard.
How to set the machine in the Safety off position:
1. Switch off the machine
2. Wait for all drives to come to a complete stop
3. Disconnect the main power
4. Secure against unintended restart
Always disconnect the main power at the machine end to be able to prevent other persons
from accidentally reconnect the main power while working on the machine.
2.8 Safety regarding maintenance
Set the machine into the Safety off position before beginning any work on the machine.
See “2.7 Definition of the “Safety off position””.
Never work on the machine while power is still connected!
All parts must have come to a complete stop before beginning any work!
Adjustment, servicing and inspection work on the period of time limits, specified in this User
Guide as well as any information on the replacement or parts and equipment must be undertaken
and/or complied with!
These activities may only be undertaken by qualified personnel.
The machine must not be connected to any power source while cleaning.
See “4.5 Cleaning the machine” for further information.
41
ENGLISH SCAN HELICOPTER POWER TROWEL
www.scanmaskin.com