SCANMASKIN Scan Combiflex Handyman, Operation Manual & Spare Parts List, Page: 7 / 23

Operation manual / Spare parts list
Scan Combiflex Handyman 125
7
Hold the machine with both hands.
Warning, break danger!
Do not throw the machine and do not transport it unfastened on loading area.
SC Handyman 125 is build and conceived under observance and attention of the basic security
standards and health standards.
The small and compact implementation of the machine can entice to use them to others than the
intended use.
It can originate dangers which are not foreseeable before.
Injury danger exists, if the machine is removed by the ground. Things can be damaged or be
destroyed.
2.5 Warning, Danger of electrical shocks
Do not use damaged lines and plugs.
The machine may be operated only in a technically flawless condition and with all safety
facilities fully operational.
In some building sites, above all in buildings their stream supply network and the security are
unknown; a protective plug is to be used.
2.6
Security and machine protection facilities
The machine is equipped with an electric approach stream limitation.
The machine is equipped with a restart lock.
2.7
Safety notes: Operation
Perform a safety check prior to each start of the machine:
Inspect the connecting cables and connectors/pugs for damage and improper connected load.
Route the electrical cables properly to prevent persons tripping over them.
Do not switch on the machine until it is in working position.
Hold the machine firmly with both hands at the handle.
Switch of the machine immediately when the operation is completed.
2.8
Safety notes: Dust
Warning! Finest concrete dust
Fine and finest dust is formed during grinding. The dust could result in health problems
when inhaled. Therefore always carry a dust protection mask during grinding.
If the SC handyman machine is subject to normal operation, dust will naturally be generated.