SCANMASKIN Scan Combiflex Handyman, Operation Manual & Spare Parts List, Page: 15 / 23

Operation manual / Spare parts list
Scan Combiflex Handyman 125
15
5
5.1
Maintenance and repair
General information
The device needs no special care, but after a certain time one must control the parts which are
subjected to a wear. Moreover we count the control and exchanging the brushes and also the
smearing in the gearbox. These works must be carried out by a service.
Pay attention to the cleanness of the device and the connection cable. Clean the aerial
grooves. The case should be cleaned with a gentle cloth.
The use of the budgetary cleaners which contain petrol, trichloroethylene, ammonia and
chloride is not permitted. These materials decompose and damage the plastic parts of
the device.
Excessively strong sparkle is a sign which is dirt in the device or points to a wear of the
brushes.
It is necessary to clean the ventilating fan openings regularly. Use for this a brush, or
blow out it with air pressure.
In the case of electric or mechanical damage bring the device for repair to your trader.
5.2
Inspection in accordance with VBG 4 § 5 (1) Nr. 2
The user is responsible for ensuring that the machine is inspected with respect to its proper
operation in intervals of 6 months. The inspection may only be executed by a skilled electrician or
by personnel that has been trained in electrical skills, provided that suitable measuring and test
equipment is used.
5.3
Safety information for maintenance works
Note!
For al works the following can be applied in general:
The works must be done by trained personnel only.
Any work performed on the electrical equipment may be carried out by skilled electricians only.
The utilization of original spare parts guarantees the necessary technical specifications.