SCANMASKIN Scan Combiflex Handyman, Operation Manual & Spare Parts List, Page: 12 / 23

Operation manual / Spare parts list
Scan Combiflex Handyman 125
12
Operation steps:
1. Switch off the machine and separate the
connection cable from the mains.
2. Turn the machine so that the bottom becomes
visible.
3. Fix the spindle with the locking button against
turn.
4. Open the flange nut with the provided key
(right-hand thread).
5. If necessary remove the worn out diamond
disc.
6. Put on new diamond disc.
7. Tighten again the flange nut.
4.2
Starting the machine
Attention, Danger of injury!
The motor starts immediately when turned on.
Hold the machine firmly with both hands.
Speed regulation
Preselect speed with adjusting wheel:
Adjusting wheel increment Speed min
-1
/ rpm
1 3400
2 4300
3 5200
4 6200
5 7100
6 8000