SCANMASKIN Scan Combiflex Handyman, Operation Manual & Spare Parts List, Page: 14 / 23

Operation manual / Spare parts list
Scan Combiflex Handyman 125
14
4.4
Adjusting possibilities at the vacuum housing
The vacuum housing can be adapted by the axial adjusting
possibility to the ground. This is necessary because:
1. the brush wears out by the constant contact to the ground,
2. the diamond disc wears out by abrasion and
3. differently high diamond discs can be used
Operation steps:
1. Switch off the machine and separate the connection cable
from the mains.
2. Release the allen screw and press the housing to the
ground.
3. Fasten the allen screw again.
Adjusting ring at the vacuum housing
4.5
Work till the edge area
With the new developed SC Handyman 125 it is possible to work
till the edge area. Moreover the front bonnet segment can be
removed.
Operation steps:
1. Switch off the machine and separate the connection cable
from the mains.
2. Tilt the bonnet segment backwards.
3. The bonnet segment is fixed with the integrated magnet at
the housing.
Bonnet segment closed
Bonnet segment opened
4.6
Grinding along the wall
The exhaust hood can be turned at 90 degrees to grind even more
comfortable along the wall.
Operation steps:
1. Switch off the machine and separate the connection cable
from the mains.
2. Release the allen screw and turn the exhaust hood by 90
degrees.
3. Fasten the allen screw again.