Scan Combiflex 450 – Manual
Chapter 4
- 56 -
4.3 Control device SC-450
1 2
Figure 4-2
SC-450 control device
Item
Function
Description
1
Stop
Stops the SC-450
2
Start
Starts the SC-450
Table 4-1
Description of control device
4.4 Start up
See”4.1 Precautions” before starting the machine.
How to start the machine
§
Make sure that the machine is equipped with the right “Scan on” tools.
§
Make sure that the main power and hoses for the dust collector are connected to the
machine.
§
Turn on the dust collector if used.
§
Push the handle downwards to lift the gear barrel about 10 cm (4”) from the ground.
§
Press the start button (2) on the control device.
§
Lower the gear barrel down to the floor.
§
Never let go of the handle during operation.
4.5 Stop
How to stop the machine
§
Press the stop button (1)
§
Wait until the machine comes to a complete stop before letting go of the handle
§
If a dust collector is used, turn off
Scan Combiflex 450 – Manual
Chapter 4
- 57 -
4.6 Control panel SC 450NS
1
2
3
4
5
Figure 4-3
Control panel of SC 450NS.
No.
Text
Description
Part number
1
L/R
Selects rotation direction
596001
2
SPEED
Selects speed
5
596009
3
EMERGENCY STOP
Emergency stop
596003
4
STOP
Stops the machine
596007
5
START
Starts the machine
596006
Table 4-2
Description of the control panel.
4.6.1 Water tank SC 450NS
To increase the flow of the water turn the knob counter clockwise. The knob will
move outwards.
To decrease the flow of the water, turn the knob clockwise. The knob will
move inwards.
To quickly stop the water flow, push the button on the knob. This
releases the knob and a spring will pull it inwards.
Secure the knob by tighten it slightly to ensure that no water will flow.
5
The range of the speed selection knob is described in ”
1.2 Mechanical specifications
”.
56
57
ENGLISH
www.scanmaskin.com
www.scanmaskin.com
SCAN COMBIFLEX 450/450NS
