background image

 

v

ZOC33

Section 1: Introduction

 

v

ZOC33

Preface

OPERATION OF LAW OR OTHERWISE, INCLUDING THE 

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 

FOR A PARTICULAR PURPOSE, AND IN NO EVENT SHALL 

SELLER BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL 

DAMAGES.

                         

In the event of a failure:

 

1) Notify Scanivalve Corporation, Customer Service 

De partment. Include model number and serial number. 

On receipt of this information, service data or shipping 

instructions will be forwarded. This may be transacted by 

telephone or e-mail.

 

2) On receipt of shipping instructions, forward the 

pro duct, transportation prepaid.  Repairs will be made and 

the product returned.

 

3) All shipments should be made via  “Best Way”. 

The product should be shipped in the original packing con

-

tainer or wrapped in protective material and surrounded by 

a minimum of four (4) inches of a shock absorbing material.

Trademarks ® and Copyrights ©

Scanivalve is a registered trademark of Scanivalve Corpora

-

tion.

All other brand and product names are trademarks or regis

-

tered trademarks of their respective companies.  

Packaging for Shipment

If the product must be shipped, whether being returned 

to Scanivalve or relocated to another location it must be 

packaged properly to minimize the risk of damage.  The 

recommended method of packing is to place the instru

-

ment in a container, surrounded on all sides with at lease 

four inches of shock attenuating material such as Styrofoam 

peanuts. 

Important Notice

Please note that the product specifications and other 

information contained in this manual are subject to change 

without notice.  Scanivalve Corporation makes an effort and 

strives to provide complete and current information for the 

proper use of the equipment.  If there are any questions 

regarding this manual or the proper use of the equipment, 

contact Scanivalve Corporation.

Contact Information

If there are any questions or concerns regarding any Sca

-

nivalve product please do not hesitate to contact us at the 

following:

Scanivalve Corp.

1722 N. Madson Street

Liberty Lake, WA 99019

Telephone: (800)935-5151   (509)891-9970

Fax: (509)891-9481

[email protected]

www.scanivalve.com

Scanivalve Corporation is an ISO9001:2000 certified com

-

pany.

Summary of Contents for ZOC 33/64Px




























Reviews: