Scania DC13 070A Operator'S Manual Download Page 52

Page: 52 / 83

OPM 200 en-GB

Scania CV AB 2014, Sweden

Cooling system

Cleaning the cooling system

Note:

Clean the cooling system more often than speci-
fied in the inspection programme if necessary.

IMPORTANT!

Do not use caustic soda or other alkaline deter-
gent as this could damage the aluminium.

External: Cleaning the radiator and

charge air cooler

Check that the radiator and the charge air
cooler are not clogged on the air side and that
the cooling fins are not damaged.

Carefully scrape away any deposits from the
radiator cooling fins. Use a paraffin-based
engine cleaner if necessary.

Carefully straighten bent cooling fins using a
steel brush or the like.

WARNING!

To ensure proper handling of cooling system de-
tergent, study the warning text on the package.

Property of American Airlines

Summary of Contents for DC13 070A




















































































Search results

Summary of Contents for DC13 070A

Reviews:

Related manuals for DC13 070A

Brands by name

Popular brands

Scania DC13 070A, Operator'S Manual

Search results

Summary of Contents for DC13 070A

Reviews:

Related manuals for DC13 070A

Brands by name

Popular brands