Panel Button Function:
HKM02B-4K/HKM02BP-4K
Button
-
+
Menu
Short Press
Reduce Value
Increase Value
Menu/Cancel
Press together
Enter
Press 3 seconds
Carry
Decomposition
Press 6 seconds
Lock/Unlock Button(When no OSD menu)
Press and hold then power on
Factory Default Engineering Mode Set Factory Default then enter Engineering Mode
HKM02B
Button
-
+
- and + together
Short Press
Reduce Value
Increase Value
Enter
Press 3 seconds
Carry
Decomposition
Menu/Cancel
Press 6 seconds
Lock/Unlock Button(When no OSD menu)
Press and hold then power on
Factory Default Engineering Mode Set Factory Default then enter Engineering Mode
In engineering mode Power and Link LED will be flash together, IP address of unit will be set to
Static
IP 192.168.0.88
temporarily, users can login to the web page by browser to change settings or
update firmware.
Rotary Switch Function:
(HKM02BT only)
HKM02BT Transmitter built in rotary switch to set channel numbers follow 16 HEX, could switch “ 0 ~ F
“ total 16 channels, A = channel 10, B = channel 11, others channel same as 16 hex conversion.
For channel numbers over 15 you could use panel button, IR remote, RS-232, APP to set up.
Front Panel LED Indication Status:
Panel LED
Status
HKM02B-4K
HKM02B
Power
Green LED
On
Boot completed
Flash Twice
Booting
Flash Slowly
Transmitter: standby( by IR remote power button only)
Receiver: video output be turned off
Breathing(Fading) Screen saver mode (not available for transmitter)
Link
Blue LED
On
Connected
& video is streaming
Flash
Connecting, or no source input from transmitter
IR
Red LED
On
Transmitting /receiving IR signal
Flash
System warring, Alert
UTP
Green LED
On
Connected by UTP RJ45 port
Flash
Transmitting /receiving data from
UTP RJ45 port
SFP
Blue LED
On
Connected by Fiber SFP port
Flash
Transmitting /receiving data from
Fiber SFP port
MSG
Red LED
On
Other message (IR, RS232,
System
setting
…)
Flash
System warring, Alert
