SC&T 4K HDMI KVM USB/RS232/IR/Analog Audio CAT5e Extender over IP Series, User Manual

Page: 10 / 28

60
Fast Switch Switch without stop link
0 = Disable
1 = Enable
0 0
61
Conflict Check Check existing TX channel X 1
62 Channel Name Display Channel Name
0 = Hide
1 = Display
0 X
63
Only Favorites
Only Favorites Channel
Available
0 = Disable
1 = Enable
0 X
64 Lock Favorites Lock Favorites Channel 0 X
65
Auto Sort Favorites Auto Sort Favorites Channel 0 X
66
Sort Favorites Sort Favorites Channel V X
67 Scan Channel To Favorites Scan Channel To Favorites V X
70
Direct Access Menu Run menu function even hide
0 = Disable
1 = Enable
1 1
71
Menu Item “Advanced Menu” Display/Hide “Advanced Menu” 1 1
72
Screensaver Screen Saver setting 0 X
73
Screen Off Option Behavior After Screen Off
0 = No Option
1 = Mute Analog Audio
2 = Stop Connection
1 X
74
Diagnostic Information Diagnostic Information
0 = Disable
1 = Enable
1 X
75
Message Redirect Message Redirect to Auxiliary X 1
76
Command Redirect Command Redirect to Auxiliary 1 1
80
Video Routing Video Routing setting
0 ~ 999 = Specific Channel
1000=Follow Channel
1000
X
81
Audio Routing Audio Routing setting
1000
X
82
USB Routing USB Routing setting
1000
X
83 RS-232 Routing RS-232 Routing setting
1000
X
84
IR Routing IR Routing setting
1000
X
85 GPIO Routing GPIO Routing setting
1000
X
86
Load Routing Mapping Load Free Routing Mapping
0~4
V X
87 Save Routing Mapping Save Free Routing Mapping V X
90 Video Wall Max Row Rows of Video Wall 0~7 0 X
91
Video Wall Max Column Columns of Video Wall
0~15
0 X
92 Monitor Row Position Monitor Position in Row 0~7 0 X
93
Monitor Column Position Monitor Position in Column
0~15
0 X
94
Monitor Outside Width Outer Width of Monitor
0~65000 (0.1mm)
0 X
95
Monitor Outside Height Outer Height of Monitor 0 X
96
Monitor Viewable Width Width of Viewable Area 0 X
97 Monitor Viewable Height Height of Viewable Area 0 X
100
Stretch Type Stretch Type
0 = Stretch Out
1 = Fit In
1 X
101
Rotate Rotation and Mirror 0 ~ 7 0 X
102
Vertical Shift Vertical Shift
400 = Default
399 ~ 0 = shift up
401 ~ 801 = shift down
400
X
103 Horizontal Shift Horizontal Shift
400 = Default
399 ~ 0 = shift left
401 ~ 801 =shift right
400 X
104
Vertical Scale Vertical Scale
0 ~ 255
0 X
105 Horizontal Scale Horizontal Scale 0 X
200 Backup Setting Backup Setting to bank 0~4
0 ~ 4
V V
201 Restore Setting Restore Setting from bank 0~4 V V
202 System Setting System Setting
0~255 (Debug use, no
recommend for general users)
V V
203 Application Setting Application Setting V V
333 Reset To Default Reset to factory default V V
999 System Reboot System Reboot V V
V = Available X = Not available Numbers = default value
 Menu 17 Free Routing function only works in Multicast mode, and must be enabled.
 Menu 25 Display or hide TV wall setting in the webpage.
 Menu 26 CEC function only available in unicast mode.
 Menu 20~25 To set select function connect to fix channel, not follow channel switching.

Menu 32 To set customize IR remote, need to be import to RX by RS-232 or Telnet command
 Menu 35 For monitors which detect HDMI 5V to enter sleeping mode.
 Menu 36 Turn off monitor by CEC command via RX.