2 If the dryer is running, rotate the programme knob, the dryer will
remind the operator it is an invalid choose.
3 When the drying programme is done, the buzzer will beep to re-
mind the user.
Instructions of the (Anti-Crease) function
At the end of the drying cycle,the anti-crease phase time is 30 minutes
(default ) or 120 minutes (selected).
This function prevents the laundry from creases. The laundry can be re-
moved during the anti-crease phase. Except (Cool), (Wool) and (Re-
fresh), all the other programmes have this function.
Instructions of the (My Cycle) function
Used to define and save your favorite proragmmes that are used fre-
quently.
1 Use the programme knob to select the required programme and
other drying functions.
2 Press and hold the (Intensity) button for 3 seconds until the beep
and the required programme has been saved.
3 Turn the programme selector to the (My Cycle) position, you can
start your favorite programmes. If you want to change the (My Cy-
cle) settings, repeat the steps (1) and (2).
Instructions of the (Child Lock) function
1 This machine incorporates a special child safety lock, which can pre-
vent children from carelessly pressing keys or making the faulty
operation.
2 When the dryer is at the operation state, press the(Anti-Crease)
and (Signal) buttons at the same time for over 3 seconds to start
child lock function. When child lock function is set, the display will
show Child lock icon and no key can effect to the dryer except
(On/Off) button. Under the start state of the child lock, the (Anti-
Crease) and (Signal) buttons shall be pressed at the same time for
over 3 seconds to release the child lock function.
Product description
A – Power cord
B - Top board
C - Container
D - Drum
E - Filter door
F - Control panel
G - Door
H - Air inlet
I - Filter base
J - Maintenance cover
Accessories
The following parts are optional for specific models.
• Hose holder
• Condenser drain hose
If your dryer has following parts, please install them
following the instruction below.
Installation of hose holder and drain hose.
Use pliers tp remove the drain hose from the hose connector.
Insert the external drainage hose.
Put the hose holder on the washing basin or any other sink.
